SKETCHBOOK by
Diana & Bill Davis of Lazy Ass Forge
|
Watch
one way to Build a Garden Gate by Dave Mudge
|
ELECTRIC
WELDING
|
How-to
Project
Build a Welding Table |
|
Learn
how easy it is to build this practical welding table, a great addition to
your home workshop.
Read this article… |
|
How To Build Your
Own Texas Grill
Why
spend a few hundred dollars on a new grill? With the Lincoln AC-225
stick welder, little or no welding experience and a touch of
elbow grease, you’ll be spending the rest of your summer in Texas!
Read this article…
|
How-to
Project
Welding an ornamental gate
James F. Lincoln Foundation Award-winning
project |
With
the PowerMIG
255, building an iron entry gate is easy and affordable. Add safety
and beauty to your home or work environment using this step-by-step guide.
Read this article…
|
|
HACKSAW BLADES
Well, I finally found some Lenox blades! They are so much
better than Home Depot's best that I use my hand hack saw where I would get out
my side grinabrasionaion blades before. A real time saver.
Thanks for the advice.
Lynn
--- Stephen McGehee <irony@epowerc.net>
wrote:
Call your local electrical wholesale house and ask if they stock Lenox
white blades. I have used these in 24 and 32 tooth sizes
for 20+ years. Don't waste your time with Klein blades though.
Stephen
|
Hints for Blacksmiths and Horseshoers
From the book "Modern Blacksmithing" by Holstrom 1904:
1) Don't lose your temper or hit the horse with your hammer
2) Don't run down your competitor
3) Don't smoke while shoeing
4) Don't imbibe in the shop
5) Don't run outdoors while sweaty
6) Don't know it all
7) Take a bath once a week
"This done the craft will be elevated, and the man respected."
|
DISCLAIMER OF RESPONSIBILITY
Dave Mudge & anyone mentioned in these pages specifically Disclaim any Responsibility or Liability for damages or injuries as a result of any construction,
design, use or application of information contained in any
of the following articles. The use of any information is solely at the USERS OWN RISK
|